MCP2551 and MCP2515 Serial CAN-BUS Module enable your Arduino and other MCU to communicate to CAN-BUS to hack your vehicle. CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed, and high reliability. This Serial CAN-BUS module is based on MCP2551 and MCP2515, which provides speed up to 1Mb/s. It also has a terminal block so you can connect to your vehicle’s OBD-II port with two wires. There's Grove connect as well as Grove cable included in the kit, which allows connecting the module to your Arduino easily. Size and Hardware Overview 4 pin 2.0mm Grove Connector Power and status led indicator Send and Recv led indicator 3.5mm terminal to connect to CAN-Bus (CAN_H & CAN_L) 120Ω resistor, default connected, if you don't need you cut this pad with a box cutter. Features Cart to CAN-BUS communication Support AT command Up to 115200 UART baud rate (default 9600) Up to 1Mb/s CAN-BUS baud rate TX and RX led indicator 4pin Grove connector to plug and play 3.3V working voltage Easy-to-use Arduino library Note: As the module uses serial communication, so the frequency of receiving data can't be too fast, you can receive a frame every millisecond under 115200 baud rate. Part List 1 x Serial CAN-Bus PCBA 1 x 4 Pin Grove cable 1 x Small screwdriver Links Wiki - SERIAL CAN BUS MODULE CANBus Hacking for Beginners Introduction to CAN-BUS and How to use it with Arduino
